Payment & Shipping Terms:
|Name:||Blood Clot Activator Powder||Grade:||Blood Test Grade|
|Purity:||No Impurity And Fine Fineness||Function:||Accelerate Serum Separating From Red Blood|
|Performance:||Good Suspension||Appearance:||White Powder|
|Specification:||250g / Bottle Or 500g / Bottle||Main Component:||Polymer, Etc|
serum clot activator,
silica clot activator
Easy Coagulant Blood Clot Activator Powder Rapid Prepare Serum
|1||Main component||Polymer composite|
|2||Appearance||White and odorless powder|
|3||Fineness||200 mesh sieve all over|
|4||Physical Inertia||No reflection with blood|
|5||Colony Experiment||less than 100/ml|
|7||Clinical Test Results||No impact on blood test results|
product name: high efficiency blood clot activator
Main components: Polymers, clotting factors, etc.
Properties: White powder, easy to absorb moisture (dry powder).
Promoting ability: The proper amount of this product at room temperature can quickly coagulate the blood sample.
Specification: 250g / bottle or 500g/ bottle
For the preparation of the test tube without silicidation is not ideal:
1. 6 g of the coagulation powder was added to 85 ml of absolute ethanol and stirred to obtain a solution A.
2. 1.8 g of a water-soluble siliconizing agent and 15 ml of purified water were prepared to obtain a solution B.
3. Mix A and B to obtain 100 ml of the coagulation suspension and spray on the inner wall of the test tube. It is recommended that the 3-5 ml tube spray dose is 20-25 ul, and the plastic tube is dried at 40-50 ° C (the glass tube is dried at 40-120 ° C).
Preparation method for siliconization under test conditions:
1. 6 g of the coagulation powder was added to 85 ml of absolute ethanol and 15 ml of purified water, stirred uniformly, and sprayed on the inner wall of the test tube. It is recommended that the 3-5 ml tube spray dose is 20-25 ul, and the plastic tube is dried at 40-50 ° C (the glass tube is dried at 40-120 ° C).
storage :sealed and avoid moisture
Validity Period :three years
Contact Person: Sales Manager