What is the impact of raw material sources on the quality of serum separation gel?

The quality of serum separation gel is affected by the production raw materials. The type, quality, purity, and ratio of raw materials used in production will have an impact on the performance and quality of serum separation gel.

Common raw materials for producing serum separation gels include hydrophobic organic compounds and silica powder. These raw materials are combined to form a gel like liquid with good thixotropy, which contains a large number of hydrogen bonds in its structure, forming a network structure.

With the development of medical technology, the demand for serum separation gel is increasing, and its use in fields such as beauty medicine is also becoming more and more widespread. Therefore, some serum separation gel manufacturers have started using hydrophobic resin materials to make the performance of serum separation gel more eye-catching in various aspects, and the appearance can be changed according to customer requirements.

At present, the commonly seen serum separation gel on the market is produced by Desheng, which is mainly divided into two materials: resin and acrylic ester.

The main component of acrylic separation adhesive is polyacrylate. After the improvement of the previous generation, this separation adhesive is a hydrophobic material that does not absorb water and fuse. Its flipping performance and thixotropy have been improved, and it is highly popular in the market.

The advantages of acrylic separation adhesive mainly include:

Rapid curing: Acrylic separation adhesive has the characteristic of rapid curing, which usually only takes a few seconds to minutes to reach the initial curing state, improving production efficiency.

Good weather resistance: Acrylic separation adhesive maintains stable performance in indoor and outdoor environments for a long time.

Good chemical resistance: Acrylic separation adhesive has good resistance to some chemical substances and can resist the erosion of acids, bases, solvents, etc. to a certain extent.

High transparency: Acrylic separation adhesive has high transparency and is suitable for application scenarios that require maintaining the transparency of the material surface.

The disadvantages of acrylic separation adhesive mainly include:

Slow reaction speed: Common two-component epoxides often require several hours to reach their intended strength, and require high mixing ratios. Single component epoxy often requires heating in order to rupture the encapsulated curing agent inside, making operation inconvenient.

Single component epoxy may have capillary effects: on construction surfaces with small gaps, due to the large diameter of the curing agent particles, they cannot penetrate into the gaps, resulting in uneven distribution of some adhesive components and the inability to cure.

The main component of resin separation adhesive is straight chain alkane resin. This separation gel has been further improved, with better physiological inertness, less aging, and radiation resistance. Even after sterilization treatment in test tubes, it will not have any impact.

1. Strong selectivity: Resin separation technology can select suitable resins based on the properties of the target substance, achieving efficient and selective adsorption of the target substance.

2. Easy to operate: The resin separation technology is easy to operate and does not require complex equipment or operating steps, making it easy to master.

3. Wide application: Resin separation technology is suitable for the separation and purification of various types of substances, and has a wide range of application areas.

The disadvantages of resin separation adhesive mainly include:

Raw material source limitation: The raw material source for resin separation adhesive may be limited, and not all resins can be used for the preparation of separation adhesive.

Separation effect limitation: The separation effect of resin separation adhesive may be affected by some factors, such as the properties of the target substance, separation conditions, etc.

High cost: The preparation cost of resin separation adhesive is high and may not be suitable for large-scale application.

In summary, the quality of separation gels made from different raw materials will vary. Use according to different scenarios. Desheng specializes in producing blood vessel additives. Welcome to consult and purchase!