Blood collection vessel additive anti irradiation serum separation gel

[Product Name]

Serum Separating Gel (Irradiation Resisted Type)

[Package Size]

25kg or 20kg/ barrel (plastic bucket or metal bucket)

[Traits]

➢ Colorless transparent colloid, a faint odor, no impurities;
➢ Physiologically inert, insoluble in water;
➢ Specific gravity 1.045-1.065g/cm3;
➢ Viscosity of 150-200 Pa·s
➢ Volatile ≤ 1.5%
➢ Excellent thixotropic and isolation performance, see product test report for other performance.

serum separator gel

[Main Components]

This product contains hydrophobic organic polymers, silica powder, thixotropic agent and stabilizer.

[Scope]

This product is dedicated to manufacture of disposable vacuum blood collection tube and
injectables, as prepared by high-quality clinical laboratory serum, blood samples preservation,
transmission and transfer the necessary materials.

[Additive Capacity]

Recommended dosage of serum separation gel into each blood collection tube is 0.8-1.0g
(0.75-1.1ml). For plastic tube with diameter of 16mm, increase adding amount of gel to more than
1.0-1.2g. Normally, after centrifugation, the gel (isolation layer) thickness is about 6mm, if so, it
could be sure that each blood collection tube has been added enough amount of serum separation gel.

[Special Storage Conditions and Methods]
Unless specified, otherwise complied with conditions noted on the packaging. Recommended
storage condition is: sealed; storage temperature of 0-40℃ (32-104°f) and avoid direct exposure
to air and sunlight.

Product packaging