|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Blood Clot Activator Powder | Main Components: | SiO2 Etc |
|---|---|---|---|
| Properties: | White Powder | Application: | Preparation Of The Test Tube Silicidation |
| Impurity: | No | Clotting Time: | 15 Mins Before Centrifuge |
| Fineness: | 200 Mesh Sieve All Over | ||
| High Light: | prp gel preparation,potassium oxalate anticoagulant,No Impurity Clot Activator |
||
| No | Item | Specification |
| 1 | Main component | Polymer composite |
| 2 | Appearance | White and odorless powder |
| 3 | Fineness | 200 mesh sieve all over |
| 4 | Physical Inertia | No reflection with blood |
| 5 | Colony Experiment | less than 100/ml |
| 6 | Impurity | None |
| 7 | Clinical Test Results | No impact on blood test results |
product name high efficiency coagulating powder
Main components Polymers, clotting factors, etc.
Properties White powder, easy to absorb moisture (dry powder).
Promoting ability The proper amount of this product at room temperature can quickly coagulate the blood sample.
Specification 250g / bottle or 500g / bottle
Application
For the preparation of the test tube silicidation is not ideal:
1. 6 g of the coagulation powder was added to 85 ml of absolute ethanol and stirred to obtain a solution A.
2. 1.8 g of a water-soluble siliconizing agent and 15 ml of purified water were prepared to obtain a solution B.
3. Mix A and B to obtain 100 ml of the coagulation suspension and spray on the inner wall of the test tube. It is recommended that the 3-5 ml tube spray dose is 20-25 ul, and the plastic tube is dried at 40-50 ° C (the glass tube is dried at 40-120 ° C).
| Product Name: | Blood Clot Activator Powder | Main Components: | Polymers, Clotting Factors |
|---|---|---|---|
| Properties: | White Powder | Application: | Accelerate Serum separation |
Preparation method for siliconization under test conditions:
1. 6 g of the coagulation powder was added to 85 ml of absolute ethanol and 15 ml of purified water, stirred uniformly, and sprayed on the inner wall of the test tube. It is recommended that the 3-5 ml tube spray dose is 20-25 ul, and the plastic tube is dried at 40-50 ° C (the glass tube is dried at 40-120 ° C).
storage sealed and avoid moisture
Validity Period three years
